Dualcomm ETAP-2306
Description
Dual-Link GbE Copper and Fiber Network TAP
Dualcomm LAN Tap ETAP-2306
HIGHLIGHTS:
- A single Network TAP for use with either a copper or fiber Gigabit Ethernet (GbE) link
- Both aggregation and non-aggregation monitoring ports
- USB Powered
- Compatible with PoE. PoE pass-through between two inline ports
- Plug-and-Play. No user configuration is needed
Dualcomm ETAP-2306 is a GbE Network TAP with multiple monitor ports which can be used with either a 10/100/1000Base-T copper link (copper mode) or a 1000Base-X fiber link (fiber mode).
In the copper mode, ETAP-2306 provides four aggregation monitor ports, each of which outputs a copy of aggregated inline traffic in both directions.
The copper mode of ETAP-2306 is compatible with Power-over-Ethernet (PoE), which is capable of passing PoE inline power between two copper inline ports. As such, a connected PoE powered device (e.g., a PoE IP phone) can still receive the inline power seamlessly from its PoE capable link partner such as a PoE switch.
In the fiber mode, ETAP-2306 provides two aggregation monitor ports and a pair of non-aggregation monitor ports. Each non-aggregation monitor port outputs a copy of inline traffic in only one direction. Using the pair of non-aggregation monitor ports is usually preferred for high data throughput situations to avoid possible packet loss due to port oversubscription.
ETAP-2306 uses the standard small form-factor pluggable (SFP) modules when ETAP-2306 operates in the fiber mode. ETAP-2306 itself does not include the SFP modules, which, however, are widely available on the market for multi-mode and single-mode fiber links. Copper SFP modules are also available for use with ETAP-2306.
ETAP-2306 automatically switches between the two operation modes by detecting the presence of SFP modules. No additional user configuration is needed.
ETAP-2306 can be conveniently powered by USB power from a USB host device such as a Laptop computer.
ETAP-2306 works with any non-SGMII based 1000Mbps SFP modules. Specifically, we have the following SFP modules available for ETAP-2306:
1) DPM-1G-SX-01: SFP, 1000Base-SX, 850nm, MMF, 550m.
2) DPM-1G-T-01: SFP, 1000Base-T, RJ45, CAT5E, 100m.
Product safety information
Safety Notice: Penetrationtest Tools The use of Pentest Tools is subject to strict legal regulations. This device is a powerful tool for security analysis and penetration testing and must only be used in compliance with applicable laws. Unauthorized access to networks, privacy violations, or any other unlawful activities are strictly prohibited. Ensure that you have obtained explicit permission from the owner of the target network before use. Improper use may result in legal consequences, including criminal prosecution. Use the Pentest Tools solely for ethical and legal purposes, such as enhancing IT security within your organization or conducting authorized tests. The Manufacturer and the retailer assume no liability for damages resulting from misuse of this device. It is the user’s responsibility to comply with all local laws and regulations.
Manufacturer information
info(at)dualcomm.comResponsible economic operator in the EU:HackmoD GmbHBessemerstr.8212103 BerlinGermany
info(at)hackmod.de